Ваш браузер устарел. Рекомендуем обновить его до последней версии.

 

Construction of houses made of aerated concrete


Projects of houses made of aerated concreteProjects of houses made of aerated concrete

 

 

Our company offers the construction of warm stone houses. We carry out a full cycle of works on the construction of houses and cottages of any size and complexity: from assistance in the selection of the project (or individual design) to construction on a turn-key basis. On our website we present typical projects from quality certified aerated concrete which is manufactured by our partner ZAO "Xella-Aeroblock-Center".


The attractiveness of a house made from aerated concrete blocks is that the cost of construction is significantly lower compared to other materials. The economy is achieved thanks to the unique characteristics of aerated concrete blocks (thermal insulation properties and vapor permeability are comparable to wood, strength - with stone) and German construction technology. Exact geometric forms of the wall made of aerated concrete allow you to limit yourself to the inner finish with a thin layer of plaster and putty. 
When using a vapor permeable plaster or a ventilated facade from the siding for outdoor use, the cost of building a house made of aerated concrete is comparable to the cost of a house made of logs. Advantages of aerated concrete are clearly demonstrated at regular road show presentations, which are carried out by the company "Xella-Aeroblock-Center".

 

Aerated concrete blocksAerated concrete blocks 

 

 

 

 

 

 

 

 MultiporMultipor

 

 

 

 

 

 

 

 

 

 


Features of walls made of aerated concrete.

 
 

Only autoclaved aerated concrete aerated concrete can be used simultaneously both as a self-supporting structural material with a building's storeys up to 3 inclusive, and as a material of enclosing structures without additional insulation. Thus, the coefficient of thermal conductivity for this material is in the range 0.09 - 0.18 W (m ° C), which is a sufficient condition in order to limit the thickness of the wall (enclosing structure) in the weather conditions of the central strip of Russia to the order of 300 to 400 mm, which corresponds to the geometric dimensions of serially produced blocks of aerated concrete in most plants of cellular concrete.
 

EXTERNAL FINISHING.

Plastering works.

Installation of ventilated facade.

Finishing with stone, tiles.

Finishing with fiber panels.

Siding finish.

Warming the facade with a wet method.

Mounting the multipor.

Warming of the facade with a "wet method", insulation of the facade with the newest European insulation made of aerated concrete - Multipor MULTIPOR - brand new, environmentally friendly, non-flammable thermal insulation on a mineral basis, with high durability. With detailed information on the product, areas of application, technical specifications, you can find on the official website of the company Ytong.

Good thermal insulation capabilities of the material, in combination with its porous structure, greatly reduce the likelihood of mold in the rooms. The internal thermal insulation of MULTIPOR panels regulates the moisture in the room, due to its ability to absorb moisture evaporation during peaks and to slowly release them back when the relative humidity in the rooms decreases. The ability of the material to "breathe" helps to create a healthy microclimate and the comfort of the living environment in the premises.

The coefficient of thermal conductivity of MULTIPOR thermal insulation boards is λ = 0.045 W / mK. Thermal insulation using MULTIPOR not only reduces the monthly costs for heating and air conditioning, but also increases the cost of real estate.    
 
Exterior finishing work.
Our company performs finishing work in stone houses. Internal finishing works, external finishing works. Finishing with natural and artificial stone, fibreboard. Installation of ventilated facade, siding. Warming of the facade with a "wet method", the insulation of the facade with the newest European insulation made of aerated concrete - Multipor

 

Finishing of stone houses.

Finishing and repair work.   In this section of the site we will stop at the decoration and repair of stone houses, offices, apartments in Moscow, cottages. In addition, we also produce certain types of repair and finishing works: tiling, painting, plastering, laying parquet and installing interior doors. The main goal of our work is quality finishing in a reasonable time. We give an annual guarantee for all types of finishing works and repairs.

Our specialists and employees have extensive experience in repairing and finishing houses, cottages, apartments, offices. This allows us to repair any complexity with the highest quality. We guarantee our customers high quality of finishing works during repair, friendly attitude of all employees of our firm, individual approach. Repair and decoration of offices we carry out only in Moscow and the Moscow region, finishing and repair of apartments in Moscow and the nearest towns near Moscow, repair and finishing of cottages throughout the Moscow region.

In addition, it is worthwhile to think about the time to begin finishing or repairing a house, office, apartment or cottage, since from May to September, the prices for finishing work and the free teams may rise. Therefore, starting repairing the office in the autumn or winter, you can significantly reduce the cost of repairs and finishing works, get a seasonal discount .

One of the activities of our company is the device screed floors including "dry floor screed". Under the term "floor screed" is understood as a complex of simple measures, the result of which is a firm and level surface. Our company considers the device of a floor much wider, where the floor screed is only one of the segments in the list of services provided by us. The device of floors can include engineering works.

For example, the installation of a warm floor using infrared heaters of a film type or a water floor, where liquid is used as the coolant, can not be done without a thoughtful engineering design. The same can be said about the arrangement of industrial, liquid or concrete floors. The installation of wooden floors requires a very scrupulous screed of the floor, and since you have to work with a pretty whimsical material - a tree - then ideally smooth surfaces are required.

A quality floor screed is not only a guarantee of the strength of the entire structure, it is also the protection of the premises from harmful thermal effects. We use only the latest achievements in building materials technologies, which allows us to achieve colossal results.

Our specialists do not get tired of bringing to perfection what they are doing, whether it is a floor screed or another kind of work. We think it is not possible to divide the device of a floor into a gradation of simple or complex works, because absolutely everything must be done with special thoroughness and professionalism. It is this approach to business that allows us to take on orders of any complexity and with brilliance to fulfill them. And the high qualification of our specialists is the best guarantee of the quality of our work.

 

Exterior finishing work.
The production of plastering can be internal or external, and the increased demand for facade plastering. The facades become a real decoration of the house, if our company takes the exterior of the building. By accepting an order, we try to outdo ourselves, not just fulfilling the task set before us, so as to please our client.

Warming, external thermal insulation of the façade "wet type".

There are many methods for warming the facades, but the so-called "wet" facades are the most widespread - the joining of the material (insulation) to the wall surface with the help of special glue and mechanical connectors (dowel-umbrella), and also the creation of layers of plaster of fiberglass and synthetic materials.

"Wet" method of facade insulation is the most common method for exterior insulation of a building. Among all the well-known methods of facade insulation, facade works with a "wet" method have a not very high cost, the possibility of mounting on various surfaces: (monolithic and prefabricated concrete, bricks, etc.), a huge selection of individual color and texture solutions, the possibility of further renovation of the facade of the building, unlimited possibilities of architectural solutions.

 

1. Priming for external works

2. Adhesive for bonding thermal insulation

3. Basalt thermal insulation

4. Aluminum profile

5. Plastic dowel

6. Mixture for anchoring

7. Mesh glass fabric

8. Mixture for anchoring

9. Primer

10. Facade plaster (or paint)

 

 

 

Structured Insulated System (SIS).

The Structured Insulated System (SIS) is a method of building walls in which the enclosing structure is both load-bearing and insulating, requiring no additional thermal insulation (similar to the construction of SIP (Structured Insulated Panel) panels.


Scroll up

Stone houses facade works

Construction of houses made of aerated concrete

The site is under construction! Sorry for the temporary inconvenience!

Publish on social netwerks

Яндекс.Метрика

Fields marked with * are required.

Cookie Policy

This site uses cookies to store information on your computer.

Do you accept?